Special Scene Graph Debugging Commands
Available since firmware version 7.2
You can use special debugging commands to debug Scene Graph applications. These commands can be invoked in the debug server from telnet port 8080 port. These commands are:
sgnodes allPrints every existing node created by the currently running channel.
sgnodes rootsPrints every existing node without a parent created by the currently running channel. The existence of these unparented nodes means they are being kept alive by direct BrightScript references. These could be in variables local to a function, arrays, or associative arrays, including a component global
mor an associative array field of a node.
sgnodes node_IDPrints nodes with an
idfield set to
node_ID, except it bypasses all the hierarchy and rules, and just runs straight down the whole list in the order of node creation. It will list multiple nodes if there are several that match.
These commands are similar to the
getAllMeta() ifSGNodeChildren methods, which can be called on any Scene Graph node.
Available since firmware version 7.5
loaded_texturesDisplay the current set of images loaded into texture memory
sgversion [default | force [<version num>]]
When the 1st parameter is default, it sets the default rsg_version of a channel when it is not specified in the manifest. When the 1st parameter is force, it sets the version despite what's in the manifest. Neither of these overrides survives a reboot.
Troubleshooting Common Development Errors
There are several very common errors that you will encounter when developing Scene Graph applications. Quite often these errors are caused by not spelling component names or variables correctly, but may appear as different types of errors on the display screen and in the debugger.
Graphic Image Does Not Appear, Question Mark Appears Instead of Image
The graphic image file was not found in the location specified in the application. Check that graphic image file is in the specified location, either on your development server, or in the application ZIP package, usually in the
pkg:/images directory. Make sure the path to the file is correct, and the name of the file is spelled correctly. Roku Scene Graph applications, like previous Roku applications, generally follow the convention used in many client display applications, such as web browsers, which is to show a default image if the specified image cannot be found. If a question mark image is shown in a Roku Scene Graph application, check the path and file name spelling to ensure that the correct graphic image appears.
Debugger Message: Type Mismatch
This usually means that a BrightScript variable has been incorrectly spelled after it has been declared, never declared at all, or declared as a local variable in another function. Check the backtrace information supplied by the debugger for the local variables used at the time of the error, and note that the variables listed as
<uninitialized>. Check for the declaration of the variable or variables listed earlier in the application prior to the error message, and correct the spelling, or declare them correctly, as needed. In many cases, the error occurs because there is an attempt to use a local variable declared in one function block in another function. To correct this, you can declare the variable using the
m object reference which gives the variable file scope.
Debugger Message: 'Dot' Operator attempted with invalid BrightScript Component or interface reference.
This message will often coincide with a blank screen. The line number at which the error is detected will be flagged with an asterisk, and the message will provide the name of the file in which the error was detected:
020:* smallexamplesize = smallexample.localBoundingRect()
'Dot' Operator attempted with invalid BrightScript Component or interface reference. (runtime error &hec) in ...pkg:/components/smallexamplescene.xml(20)
020: smallexamplesize = smallexample.localBoundingRect()
This message will appear if a component by that name has either not been created, or an attempt is made to access a component member using an incorrectly spelled component name. Check the backtrace information supplied by the debugger for the component objects and variables used at the time of the error, and note the component objects listed as
#0 Function init() As Void
m roAssociativeArray refcnt=3 count:2
devinfo bsc:roDeviceInfo refcnt=1
screenresolution roAssociativeArray refcnt=1 count:3
Note also the variables that were assigned values from interface functions on invalid component objects will be listed as
<uninitialized>. Typically in Roku Scene Graph applications, the problem is caused by attempting to create a component object for a component class name that is not in either the built-in node classes, or extended node classes declared in the application package
components directory. To fix this error, scroll up in the debugger output to the point at which the component object creation error occurred, which will have the following error message:
BRIGHTSCRIPT: ERROR: roSGNode: Failed to create roSGNode with type Rectangleexample: ...pkg:/components/smallexamplescene.xml(16)
This shows the file and line number where the actual component object creation error occurred. To fix the error, correct the mismatch between the component name and the component object creation function argument. Quite often this is the result of a case mismatch between the extended component name in a
<component> element, since these names are case-sensitive. Correct the case-sensitive spelling of the component name either in the component file, or at the point where you attempted to create the component object.
List or Grid Fails to Appear, or First Item is Blank or Missing Information
This often indicates that the ContentNode node assigned to the
content field of the list or grid either does not exist, or was assigned after focus was set on the list or grid. Ensure that the ContentNode node has been created successfully at the time it is assigned to the list or grid content field. Then check that focus was set on the list or grid after the
content field is assigned a valid ContentNode node. Since you will generally be generating a ContentNode node by parsing data from an XML or JSON file downloaded from your server in a Task node (or possibly downloaded as "singleton" at the time the Scene Graph application was created in the
main.brs file and converted), make sure you set the
content field and focus on the list or grid in this way:
m.videolist.content = m.readVideoContentTask.videocontent
This is a typical callback function that is triggered by the ContentNode node being created in a Task node (in this case, the event was a new ContentNode node assigned to the
m.readVideoContentTask Task node object <interface> element
Also, if you are having problems with a callback function not assigning a valid ContentNode node, carefully check that the field observers were set before the Task node was configured and launched (but after the Task node object was created). For example, for the above example, the Task node object should have been created, had the field observers set, configured, and launched, in that order:
m.readVideoContentTask = createObject("RoSGNode","MetaDataCR")
m.readVideoContentTask.metadatauri = "pkg:/server/videometadata.xml"
m.readVideoContentTask.control = "RUN"
This is the sequence to use for all object field observers. If an event in an observed field triggers a callback function after the field observer is set, the callback function is likely not to work as expected.
Debugging Scene Graph Node Memory Usage
In a development channel, you can use the special Scene Graph debugging commands to evaluate node memory usage, including potential memory leaks.
A node leak in a channel is simply any node that is no longer reachable by the channel code, yet still exists. Such a node is holding onto memory and other resources unnecessarily. Due to reference counting of nodes in BrightScript, the only way to create true leaks is to create isolated cycles by severing external references to objects which refer to each other. For node cycles, that means that either a node references one of its ancestors (including itself) in a field or one or more nodes reference each other in fields. Note that field types that can hold references to nodes include node, associative array, and regular array.
Some nodes are not leaks since they are still reachable by the code, but they are nevertheless unneeded if there is no intent for the code to use them ever again.
The following ifSGNodeChildren methods can be helpful to find both leaked and unneeded nodes.
getRoots() method can be used to find nodes and node cycles that are not referenced by any other nodes, and these roots should be inspected carefully to determine whether any of the root nodes are leaks or unneeded.
If they are leaks, they must be part of cycles or they would have been deleted already. To fix these, the code should either not create the cycle, or break the cycle before removing the last code reference to the node. Automatic garbage collection will recover these leaks after the channel exits, but a long-running channel accumulating leaks may begin to slow down or eventually even crash.
If the nodes are merely unneeded, they might not be in cycles but may be simply stored somewhere the code will no longer access even though it could. If so, the channel should be updated to dereference any nodes that are no longer needed. This can be done by setting the variables or fields that are holding the nodes to invalid.
getAllMeta() methods can also be used to find nodes that are still referenced by other nodes, but still may be leaks or unneeded. The set of top-level nodes directly under the
<All_Nodes> XML element is similar to those returned by the
getRoots() method, and any leaked cycle will have at least one member in this set. Unneeded or cyclically linked nodes can appear anywhere in the node hierarchy, however, so the complete listing should be reviewed when leaks are suspected. A leaf entry that references any node above it in a tree represents a cycle.
Note that determining whether a node is unneeded is not always a simple task, and is up to the intent of the channel code. Outright cyclical leaks can be detected automatically, but since that can be a time consuming operation, it is only performed on channel exit, and the channel should be coded to avoid creating them.
You can also use the equivalent
sgnodes debugger commands (see Special Scene Graph Debugging Commands).